We are the regional distributor of the following products by Central Products (Tianjin) Co Ltd
The POLYcoat Series products are most frequently used for the protection of buried pipe and structures. These products are used on both new pipe applications as well as for renovation and repair projects. This bitumen based products provide the highest surface adhesion and won’t separate from the pipe surface even in high soil stress installations.
The adhesive which is formulated with corrosion fighting bitumen also provides high resistance to moisture permeation.
The Bitumen based products are coupled with PE/PP backing providing excellent mechanical protection from fierce soils as the pipes move during the service life. The PE/PP backing also provides exceptional electrical isolation to complement any impressed current system. Normal life of these products can be well over 30 years.
The key benefits of the products can be found in the following advantages:
(Click picture for downloadable PDF)
The STAC system products are most widely used for maintenance projects. These products are non-toxic and non-flammable. They are simple to apply, highly flexible and conform easily to irregular and voided surfaces. These petrolatum based products can be applied to all kinds of surfaces – cold, wet or submerged, pitted or corroded. Once applied on a minimally prepared surface, the corrosion on the surface will stop.
These products are corrosion resistant to water, salts, acids and caustics. They also have excellent long term UV stability. These petrolatum based products do not harden with time and can be removed for inspection and then reapplied. Many installations have service lives of over 20 years.
The key benefits of the products can be found in the following advantages:
(Click picture for downloadable PDF)
The SPLASHpro system is most suited for the protection of subsea pipelines, risers and pilings in the splash zone.
The aggressive offshore environment of splash and inter-tidal zones makes corrosion control a challenge for conventional methods. These areas are exposed to waves, spray of seawater, and the atmosphere.
The high concentration of salt, oxygen, temperature variation, and mechanical damage due to flotsam and jetsam makes the splash zone the most easily corroded part of a structure and also the most difficult to protect against corrosion.
The Splash Pro system consist of an inner anticorrosive barrier of petrolatum based STACwrap and an outer mechanical protection HDPE jacket. Many installations have provided more than 20 years of mechanical protection.
The key benefits of the products can be found in the following advantages:
(Click picture for downloadable PDF)
POLYARMOR is a solvent-free modified epoxy resin. It has excellent adbesion, chemical resistance, wear resistance, etc. Due to its special properties, POLYARMOR is used as a corrosion protection method in many highly corrosive considtions.
In marine applications, there were serious concerns of Isocyanate components in Polyurethane Coatings as raised by IALA. Hence the development and application of Polyarmor Modified Epoxy Resin which is Isocyanate free.
POLYARMOR is used as an anti-corrosion coating over surfaces, such as buoys, metal pipes, ship valves, metal tanks, concrete foundations, bridge pier, bolts, inside well structures, etc.
(Click picture for downloadable PDF)
